My location: United States
Viper 977 EVO-35th Anniversary Edition  (SER903014)
Zoom image

Viper 977 EVO-35th Anniversary Edition (SER903014)

Out of stock
Viper 977 EVO 1/8 GP 4wd 35th Anniversary Limited Edition , 350 only. Special version with: Serpent lap-top size bag with embroided logo special Serpent cap with logo and 35 embroided black edition with machined edges for all alu parts, supernice looks Chassis in blak with engraved loog and limited car number XXX / 350 USB memory stick carbon look ( with Manual, set-ups, Serpent 35year anniversary booklet with history of Serpent, Serpent tool brochure) + new chassis stiffner + carbon aero disks fr and rr + central flex-set + brass chassis weight x1 + alu servos saver set + transponder holder carbon + alu wheel-axles fr and rr, and steel rr cvd's Gaspowered toplevel racecar with 4wd, belt-drive, Centax true motion clutch, XLi8 gearbox, flex-system front and rear, brake on rear axle, front one-ways, rear solid axle, ballraced anti-rollbars. A fully adjustable race chassis to the latest spec and technology. Design by Michael Salven
  • US$616.62
Market price: US$880.88, you save US$264.26
  • 30% less
Add a different product to compare
  • Weight
    11 lbs
  • SKU

Front bumper with inserts
The newly developed front aero type bumper is a very durable unit, which as extra feature offers removable inserts. Its very easy and quick to test with or without inserts in a matter of seconds.

Aluminium central flex system with bearings
The system consist of a lower and upper anodised aluminium section, connected with screws for zero flex, or with bearings inside for some controlled flex. It needs removal of only 2 screws to go from fixed to controlled flex.

Carbon fibre 2.5mm radioplate with aluminium mid-flex system
The stiff carbon fibre radioplate is one piece again with the flex system moving to the center of the car, just behind the tank.

Aluminium chassisplate in 7075 T6 with optimised flex and weights slide
The chassisplate is a very important part as central unit in the car. The flex-characteristic is a major point, as well as weight balance with the sliders we apply and the dissipation of heat from the engine. The chassis is narrower in the front to allow a slightly different geometry. 2 sets of front lower pivotpins holders are included to change the geometry, run it narrow or wide. Machining of the chassis allows flex in a different area as before, and can be influenced by using the carbon brace.

New geometry with narrower front end
The narrower chassis in front allows to run a slighly different geometry in the front.

Centax hardcoated alu clutch gears with 0.8 pitch
To go with the 0.8 pitch gears, the Centax gearpinions also needed to go to the 0.8 pitch. The precision machined and hardcoated gears are durable and smooth. The Centax clutch is a Serpent innovation from the early nineties, and is in use by almost all brands now.

Key new features
- 2-speed gearbox SL8 XLi with superlow inertia
- Composite 2-speed gears with 0.8 pitch
- Centax hardcoated alu clutch gears with 0.8 pitch
- Aluminium chassisplate in 7075 T6 with optimised flex and weights slide
- carbon fibre 2.5mm radioplate with aluminium mid-flex system
- aluminium central flex system with bearings
- front bumper with inserts
- new geometry with narrower front end
- improved rear bodymount

Key new features explained

- 2-speed gearbox SL8 XLi with superlow inertia
All the parts of the gearbox have been made smaller and as light as possible, to lower inertia even further, still keeping durability on top of the list. The gears changed to a 0.8 pitch which is smoother than the original one. The Serpent gearbox system was our innovation in the late 80-ties and the system hardly changed, only optimised, and now as system in use with all other brands .

- 4wd belt-driven race car
- 2-speed gearbox and Centax race clutch
- Independent suspension with hydraulic shocks
- Front shaft with oneways and rear solid axle
- 5mm aluminium chassis with weight slider system
- 2.5mm carbon radioplate with flex system
- Aluminium bearingblocks front and rear
- Central rear axle brake
- Front cvd , rear dogbone drive, both with quick change wheel system/axles
- Ball raced front and rear anti-roll bars

More images:

General Features:

5mm aluminium chassis in perfect symmetrical shape for even flex and weight distribution. Aerospace quality 7075 T6 aluminium with engraved logo. Improved stiffness around the engine for better engine performance. Countersunk holes, chamfered edges for more cornering, ground clearance. Space in center part of the chassis to allow mounting of brass sliding weights, which are used as set-up tool, to play with chassis balance. This has big influence on steering, grip and tyre wear and is very easy and quick to change. All screws from the bottom are with 2.5mm allen size.

The strong aerodynamic shaped composite bumper. The upward edges make it more stabile, so these wont touch the surface under impact or with high temperatures. As extra feature offers removable inserts. Its very easy and quick to test with or without inserts in a matter of seconds

The durable composite front bodyposts are excentric , to allow moving the body to front or back a few mm to optimize steering / downforce.

The steeringblock , which can be mounted left or right, offers a system to change the axle position more to front or back giving a “trailing” or “leading” steering, and the ability to change the kingpin-inclination and offset. The steeringblock features an aluminum plate to connect the steering-rods, 2 options for Ackermann.

The spring-steel steering-rods are fastened to the alu steeringplates, which mount to the new steeringblocks. Optional carbon fibre disks can be mounted on the side of the uprights to stiffen the assembly and for aerodynamic reasons.

The long durable front lower wishbones, are mounted superlow in the car, and feature a semi covered “leg” for the inner suspension pin and the pivot link for the front anti-roll bar system, its also has an extension for the down-stop screw . The lower arms hold the lower alu shockmount plate, which allows a further out and higher mounting point for the front shocks. The strong upper arms in can be used left and right. The front lower arms connect to the alu front bracket on very low nylon holders. The kit includes 2 versions, wide and narrow . This whole system also enables you to replace a front driveshafts very quick and easy.

The longer upper arms are mounted between the anodized aluminum top brackets, which also hold the suspensionpin inserts to allow camber-change adjustments with 3 possible inserts . Below the alu top-brackets spacers can be used to change angle or height. Caster spacers are used as simple clips on the upper pivot pins. Same clips are also used on the lower pins to change wheelbase.

The topmounted composite bracket gives extra stiffnes to the front section, it holds the 3mm thick carbon fibre front shocktower and allow for the down-stop screws.

The ballraced front anti-roll bar is a wire type, with very easy and fast open access on the front, captured in the alu front braces. The standard wire is 2.5mm and 2 other as options. The pivotballs link system directs the power to the bar in a smooth way and easy to adjust the tweak with the captured pivotball.

In the front the alu front axle with Japan-made one-way bearings features now an improved pully assembly, free of play and super-true. Springsteel drivecups, strong, long and thin spring-steel driveshafts with CVD system, and ballraced springsteel wheelaxles with alu quick-change levers. The open front end design allows for very fast and easy removal of the front axle or parts.

The springloaded servo-saver allows easy and fast Ackermann settings. The servo-saver features a top mounted insert which can be used in 3 positions. Another 2 Ackermann positions on the steeringblocks.

The steeringblocks and rear uprights connect to the arms with springsteel 8.5mm pivotballs , which run very smooth and well protected in nylon cups, and are easy to adjust with an allen tool.

2.5mm carbon fibre radioplate with the the center flex-control system. The radioplate holds the fueltank, the receiver battery and the integrated electronics bracket/box, as well as the center flex system

The new center flex system consist of a lower and upper CNC machined aluminium bracket and a smal carbon brace. The upper one is fixed to the radioplate and the lower one to the center radioplate mount.
In rigid standard positon the upper and lower brackets are mounted fixed with 2 screws.
In the flex position the 2 bearings are in place and with the 2 screws dis-assembled, offer the central chassis flex.

Compact composite brace and box in one, which holds and protects the receiver and mounts both servo’s, which both lay on their sides, as low as possible, just a small clearance to allow for chassis flex. The cap of the receiverbox offers a unique yet simple and safe holder for the cable connectors of the receiver, which works as a simple switch and is very accessible.
The optional carbon transponder brace mounts to the integrated electronics brace. When using a small receiver, the box has space to hold the transponder too, but must be tested for function before the race. In our test it worked.

Low 125ccm fueltank in a long and narrow design, with a premounted bronze filter. The narrow tank will ensure a better fuel-supply to the engine, as the fuel can move less from side to side. The labyrinth inside the fueltank will also keep the fuel more stabile and avoids foaming. The tank also has elevated sections in the front, which make sure the fuel stays close to the filter when the tank is amlost empty. This creates like a warning signal a few seconds before the tank goes fully empty, so you can try to find a safer place to park. The fueltank has a strong springloaded cap and silicone rubber shaped seal, and has a connection for the pressure line. The inner bottom of the tank allows for mounting inserts to reduce volume if needed.

The composite nylon radioplate bracket, holds the rear part of the radioplate and the strong chromed angled roll-bar, and also mounts the adjustable ballraced belt-tensioner. An aluminum one is optional.

The majority of the topmounted screws are in allen 2.0mm size, except for the upper suspension brackets in 2.5mm.

The batteryholder between the tank and side belt , is made to fit the more common Lipo packs. There is also enough space to fit a regular batterypack. The holder incorporates an easy spacing system to allow this.

The light, hollow 8mm hardcoated aluminium middle shaft is kept rigidly in place a small, low placed and light alu holder, which also holds the spring-type exhaust-wire.

The final drive ratio of the car is 2.286
28T front pulley
18T mid-inner pulley
25T mid-outer pulley
19T outer lay-shaft pulley
21T inner layshaft pulley
48T rear axle pulley.

All the superround and true pullies have holes in the side flanges to allow dirt and dust to move out easier. The 977 has the latest pullies, with more teeth, so larger diameter which makes the belts run smoother, with less friction.

The belts are low friction type as standard, rear one as 8mm, side in 6mm and front 6mm too. The adjustable ballraced belt-tensioner ( carbon, alu) keeps the sidebelt running smooth.

The low seated anodized aluminum engine mounts keep the engine well positioned and aligned and transfer heat to the chassis in the best way.

The rear end construction with the alu brackets holds the brake and rear axle. Its open design allows for eas of maintenance and cleaning, and needs very few screws to dis-assemble. Replacing a belt in case needed, is simple and very fast too. The excenter on the rear shaft allows for belt tensioning. The whole rear end can be removed as one unit from the chassis, with very few screws.

The rear axle sits very low in the car, to achieve more mechanical grip.

The brake is on the rear axle, next to the solid axle pully. This reduces the inertia effect of the brakedisc a lot because the rear axle spins much slower than the twospeed shaft. Also the brake-stress on the rear belt is almost gone. It’s a very compact system and well protected against dirt, but still open enough to allow for sufficient coolng. The swimming ventilated brake-disk rotates on the rear axle and the springloaded cam-operated brake pads will provide all the stopping power you may need. The race brake pad material is baked on strong steel plates and allows very precise braking with lots of brake-feel / feedback. Instead of a cable we opted for the well-proven wire-linkage of all Serpent cars.
The ballraced brake activator is bolted in a light alu holder to the right rear bracket.

The ballraced rear anti-roll bar mount in steel adaptors, which run in nylon spacers in the alu holders as integral part of the rear brackets, with 2.5mm as standard wire and 2 other as options. The anti-roll bar links to the rear lower arms with adjustable trackrod guidance.

The solid rear axle with lightweight 48T pulley in Serpent springsteel, 9mm wide with 4 slots for the pin.

The aluminium rear brackets and the 2-speed layshaft holders have small ears which allow for mounting of the optional alu or rubber spacer, to control flex. Either full flex, no spacer, or some flex with rubber spacer, or zero flex with the aluminium spacer.
The suspension bracket and rear plate hold the pins firmly and have composite roll-center inserts to allow for fast and precise changes.

In the rear strong springsteel driveshafts , springsteel wheel-axles with alu quick-change levers and a springsteel rear axle. Very durable and lasting drivetrain

The long durable rear lower wishbones can be used left and right. The lower rear arm holds the low mounted link for the rear anti-roll bar and holds the alu mounting plate of the rear shocks, which allows a position which is very far to the rear and to the outside for best performance/ geometry. The lower arms also hold the easily accessible down-stop screws. Nylon clips are used on the lower rear pins to change wheelbase.

The durable composite uprights hold the ballraced spring steel wheelaxles, with aluminium quick-change levers. The 8.5mm piotballs are used to adjust camber fast and easy with the smooth hex-shaped plugs . The arms of the floating bodymount mount to the top of the uprights. On top of the up-right spacers can be added under the pivotball to change rollcenter and camberchange.
Optional carbon fibre disks can be mounted on the side of the uprights to stiffen the assembly and for aerodynamic reasons.

The adjustable rear upper camber links mount to the rear carbon camberplate with 2 positions .

The rear floating bodymount is mounted on the up-rights with 2 arms and held in place by a carbon-fibre-steel guider. The mount has 4 positions each side to choose from, depending on body In use. The end of the mount allow for mounting body-supports , with full threading to allow exact positioning. The system leads the available downforce direct onto to the uprights to the tyres.

2-speed gearbox SL8 XLi with superlow inertia
All the parts of the gearbox have been made smaller and as light as possible, still keeping durability on top of the list. The gears changed to a 0.8 pitch which is smoother than the original one. The Serpent gearbox system was our innovation in the late 80-ties and the system hardly changed, only optimised, and now as system in use with all other brands .

Composite 2-speed gears with 0.8 pitch
Smaller lighter gears and with 0.8 pitch for smoothness and performance. The precision machined and hardcoated gears are durable and smooth.

The innovative Serpent True Motion Centax clutch is fitted. Serpent as inventor of the original centax clutch, has developed the clutch over the years and the current version excels in power throughput , reliability and eas of setting. The standard version comes with a steel clutch bell, red centax show and hard anodized clutch-gears.

The kit features high speed ballbearings, mostly sealed ones with aeroshell lubrication or grease. All bearings in the car ( except for the servosaver and brakecam) are seated in nylon bushings to reduce vibrations and play.

The shockabsorbers are the latest Serpent RCM units with membrames. The threaded houses with setting-nuts ( o-ring inside) makes ride height changes easy and precise. The RCM shocks are very smooth, and easy to assemble and fill. The shocksprings are selected, matched, flatgrinded, colorcoded units, equal length front and rear.

The kit does not include engine-pipe, airfilter, body, tyres-wheels or electronics.
The silicone shockoil , silicone fuelline and pressure line is included.

The 977-evo comes with a full color assembly manual Online as PDF , reference guide and exploded views all in one. Set-up sheets ( blank and default) are ready to download seperately, and 2 decalsheets are included in the box .

Set-up possibilities
- Wheelbase
- Caster
- Trailing/leading steering
- Offset
- Kingpin-inclination
- Camber
- Camberchange
- Roll-centers
- Ride height
- Droop
- Width
- Toe-in
- Weight balance
- Shocks for dampening and springs, shockangle
- Gear ratio with pullies and 2-speed and clutch
- Anti-roll bar thickness
- Flex/no-flex

A large selection of optionals to further improve performance, speed, weight and looks.

- Website
- Promopage
- Facebook page
- Viper 977 Facebook user group
- Serpent Advanced user Manuals pages
- Youtube video’s
- Online set-up sheets
- Support from distributors, dealers and teamdrivers worldwide

A nice selection of shirts, sweaters, jackets, caps, bags, tools and decals .

Serpent Viper 977-EVO Designed by Michael Salven, Germany.

Rear floating bodymount
Extra ribs and more material is added to increase the stiffness of the rear bodymount and a 4th hole is added both sides for more tuning options

  • Brand:
  • Product Type:
    Gas Cars > 1/8:
  • Class:
    1/8th scale gas on-road, IFMAR rules
  • Purpose:
    High-end competition
  • Weight:
    2.420kg (depending on radio gear)
  • Track-width rear:
    260mm - 266mm
  • Track-width front:
    250mm - 260mm
  • Wheel base:
    Adjustable 296 - 300mm +/-1.7mm
  • :
    Adjustable +/- 3mm (rear)
  • Chassis:
    5mm 7075 aerospace quality aluminium
  • Radio plate:
    2.5mm carbon fibre,
  • Suspension:
    Independent double wishbone suspension
  • Shock absorbers:
    RCM shock absorbers
  • Fuel tank:
    125cc design
  • Rear axle:
    Solid rear axle
  • Front axle:
    Aluminium front axle with one-way bearings
  • Gearbox:
    Lightweight 2-speed XLi8
  • Clutch system:
    Centax true Motion clutch system
  • Instructions:
    Full colour Instruction manual online / PDF
  • Adjustability:
    Camber, Caster, Down-stops, Up-stops, Toe-in, Track width, Wheel base, Front & rear roll centre
  • :
    Engine, pipe, body, radio equipment, wheels, tires, battery pack are not included.
07-30-16Serpent 35th Anniversary swf5 MBDownload
07-30-16Serpent 35th Anniversary pdf2 MBDownload
07-30-16Serpent 35th Anniversary html9 KBDownload
07-08-16Serpent XLi gearboxes: tech-tip880 KBDownload
10-08-15Manual 977-evo v16 MBDownload
07-19-15SAM 977 - weights569 KBDownload
07-10-15Shock-spring-sheet432 KBDownload
06-19-15SAM 977 - rimcover aero2 MBDownload
06-09-15SAM 977 - flex2 MBDownload

Serpent Viper 977, Limited 35th Anniversary Edition; almost sold out... (02/29/2016)

Serpent released the Viper 977 in a very special Limited Aniversary Edition end last year.

Only less than 50 pieces are still available, make sure to order yours before its too late !

more >>>

02/29/2016 Serpent Viper 977 in 2016 season: 1/8 scale onroad

12/02/2015 Scoop: Serpent VIPER 977-EVO 35th Anniversary Limited Edition

09/23/2015 new optionals for Viper 977

08/23/2015 Germany: Merlin Depta Vice European Champion 1/8 with Viper 977-EVO

08/19/2015 EC 1/8 onroad, Germany

All the News

Drop items here to shop
Product has been added to your cart
  • Product is out of stock
    • US$38.52
    Add a different product to compare
    • 10% less
    • US$12.62
    Add a different product to compare
    • 10% less
    • US$40.81
    Add a different product to compare
    • 10% less
  • Product is out of stock
    • US$40.93
    Add a different product to compare
    • 10% less
    • US$10.27
    Add a different product to compare
    • 10% less
    • US$19.99
    Add a different product to compare
    • 10% less
  • Product is out of stock
    • US$7.41
    Add a different product to compare
    • 10% less
    • US$14.19
    Only 6 left in stock
    Add a different product to compare
    • 10% less
  • Product is out of stock
    • US$13.58
    Add a different product to compare
    • 10% less
    • US$10.65
    Add a different product to compare
    • 10% less