Serpent is pleased to announce the release of the Serpent 966-TE v2, the next stage in the development of the highly successfull 960 platform.
Main news for the 966 - TE Team Edition
- 2012: True Motion clutch and RCM shocks
- SL8 gearbox included, for lower inertia
- front aero bumper
- split-type carbon radioplate with flex-control, and front stiffner/support
- new front upper geometry with inner pivots more out and shorter upper arms, for more corner entry grip and more corner speed
- new rear upper geometry wth new camber-bracket, and upper camber-rods instead wishbone
- rear lower shockmounts/extenders in carbon, for new shock-angle
- new style tank-top/tank-cap ( same as S811 )
Below all details are shown, step by step.
The rear end geometry provides excellent rear end grip and provides a very stable car both under braking and at exiting corners. The OS 2 uprights sport small bearings to reduce un sprung weight, 3 upper arm mounting positions and the possibility to use shims for changing the roll centres. Strong lower wishbones with sufficient material around the pivot pin and pivot balls, and the upper arms allow easy adjustment of the camber and camber rise. Longer body mount arms provide more down force to the wheels yet have no binding due to their mounting position.
The rear body mount on the Serpent 966 can be connected in several different ways to increase or decrease the downforce transmitted from the body to the rear wheels. There are longer body mount arms, that are mounted to the rear uprights at axle level which provides more down force to the wheels. The whole assembly is also free from binding, meaning there is no restriction of the movement on the suspension.
The wire type rear anti-roll bar on the Serpent 966 is ball-raced for extra precision and more accuracy.
The blade type rear anti-roll bar is optional.
On the Serpent 966-TE the rear roll centre is adjustable through the use of offset composite inserts, which position the wishbone pivot pins of the lower wishbones.
The rear camber rise can also be adjusted through the same method but on the upper rear wishbone pivot pins. The use of composite inserts means both adjustments can be easily made track side.
Made from Spring Steel, the solid rear axle is very durable and ultra strong providing a perfect base to mount the rear drive pulley. A steel pin secures the pulley and an o-ring keeps it in place.
The steering servo is mounted on the right side directly to the bottom of the radio plate and hangs free from any other item. The steering system uses a centrally mounted servo-saver, which features adjustable spring tension and comes with four Ackerman options, through the use of inserts, to help fine-tune the 966-TE steering characteristics. Adjustable steel track rods with left and right threads are standard.
The receiver on the Serpent 966 can be mounted in two different positions, depending on whether you choose the laydown throttle servo mounting or the traditional upright throttle servo mounting.
If you mount the throttle servo using the laydown configuration, the receiver is mounted on the left side of the radio plate, between the fuel tank and the exhaust system.
If you mount the throttle servo using the traditional upright configuration, the receiver (and protective cover) can be mounted next to the throttle servo.
The benefit of these alternative mounting positions is that it offers choices for electronics placement, as well as options for eliminating any recurring interference issues that may occur.
Serpent have supplied the 125cc fuel tank with a silicone rubber seal for the fuel tank lid that prevents leakage and thus provides more consistent engine performance. Made from silicone rubber, the new seal has been shaped to create a perfect seal around the opening of the tank and allowing the tank lid to close fully.
The tank is made from a newer stronger material. The tanks have more resistance to shattering in the event of a heavy impact and changes to the lid pivot pin position further ensure a perfectly sealed tank. The new material is also less heat sensitive and will keeps it shape better also when hot.
The tank offers the option to mount small spacers inside to fine-tune the volume.
The rear shock tower of the Serpent 966 is made from 3mm carbon fibre, which again makes this part ultra crash resistant. The rear shock tower sports 4 shock mounting positions to help you fine-tune your cars handling track side.
The Serpent 966-TE comes standard with both spring-loaded aluminium quick release levers.
This reliable and time-saving system enables very quick tire changes during long distance races, allowing you to get back on the track in as little time as possible.
Due to the front wishbone configuration, it is possible to very easily adjust the car's wheelbase through the placement of 1 upper and lower caster clip on each side of the car.
In the rear you can place shims in front or at the rear of the lower rear wishbones to obtain plus or minus 3mm.
The Serpent 966 is a top-level competition racer and is therefore fully adjustable. The racer can change numerous settings easily and effectively, including the suspension geometry. The down stops can be easily accessed and easily adjusted with optimum effect. Caster, track-width, toe-in, camber, camber rise, and wheelbase can also be adjusted with ease, as well as the front and rear roll-centre and rear body mount mounting angle.
Supplied with sealed high-quality lightweight bearings throughout, the drive train is very efficient and runs very smoothly.
30 bearings in total including 3 one-ways.
The SL8 2-speed gearbox is race proven and is easy to adjust and assemble thanks to its simple design. The gearbox features large ball bearings for extra durability and smoother rotation.
The 8mm shaft will offer increased stability.
The new 2-speed gears are mounted to the carriers with three small screws and come in a full range of gears available in combination with pinions for the Centax-II clutch.
Using a spring-type mounting wire to isolate vibrations, the spring is attached to the car by means of an aluminium mounting post attached to the radio plate.
Serpent introduces new Centax clutches for 1/8 onroad.
The development of the Centax clutch continues. Serpent’s designer Ron Ton was the innovator of this revolutionary clutch system in the mid 90-ties. Soon it has become the standard in onroad racing, as all other brands adopted similar systems.
Many variations have been tried, but in the end it still comes close to the original idea.In the latest development the tapered shape has been moved from the flywheel to the pressure plate instead, improves punch and reliability.
Serpent continues the use of the hard Centax spring to set preload, as its less critical and faster to adjust.
The 1/8 scale Centax True motion clutch, has the black shoe and aluminum cutch housing as standard. Yellow and red shoes can be tried as well, as well as the steel or light steel clutch housing.
The Centax system, invented by Serpent (Ron Ton) in 1992 is since long a standard in the rc industry.
The strong engine mono block that takes advantage of the extra space where the engine is mounted on the LCG (Low Center of Gravity) chassis plate. As well as the benefits of the mono block system, to stop the engine flexing, the block allows the motor to be mounted lower in the chassis by 2mm. Due to the engine being lowered the car is now supplied with a smaller diameter flywheel.
The Serpent 966-TE uses three Kevlar-reinforced main drive belts, driven by a series of composite pulleys mounted on aluminium pulley adapters. This allows for a very smooth and efficient drive system that can withstand severe punishment.
The 966-TE offers two possibilities for the mounting of the throttle servo, first of which is the the traditional stand-up throttle servo layout. To lower the cars centre of gravity there is also an option to mount the throttle servo in a lay down configuration. This moves the heavy motor and other parts of the servo lower and to the inside allowing for better weight distribution and C of G.
The lay down throttle servo assembly has been designed to fit in the standard servo mounting space, thus enabling the easy change over between configurations. If you decide to use the traditional upright mounting, you can mount the receiver next to the throttle servo. Otherwise the receiver is in its standard place on the left side of the radio plate.
Another feature is the two carbon-fibre side mounted chassis stiffeners. These plates form a strong bridge between the front and rear section of the 960, and are mounted directly to the radio plate bracket and to the rear bulkheads. They increase the chassis stiffness, an essential condition to make effective use of the sophisticated suspension adjustment options.
The left chassis stiffener doubles as a belt-tensioner holder to with a longer slot to enable changes.
The Serpent 966-TE comes standard with an adjustable front anti-roll bar. By rotating the 2 blades, you can easily adjust the stiffness. Centering with an improved adjuster eccentric.
The front axle is made from high-grade aluminium and contains the best quality one-way bearings lubricated with one-way lube. This ensures a consistent drive to the front Spring Steel drive cups.
Anodized, cnc machined, aluminum main rear axle supports with coated alu eccenters; more rigid, better rear axle support for a very true running rear shaft, easy belt-tensioning, easy access for maintenance. With the eccenters you can choose 3 positions for rear- belt tensioning. By removing the eccenter on one side the rear shaft with pulley and belt can be accessed very easily. Main rear supports are machined maximum to reduced weight, but retain rigidness at the same time. Pins are pre-pressed into the bottom of the brackets which then seat into the positioning holes in the chassis. Precise and secure.
The RCM shock absorbers are super-smooth and very easy to build.
Coated aluminium threaded shock-bodies, perfect pistons, smooth o-ring-bushing package, effective silicone membranes, durable hardened shock-rods, the works !
Lower mounted brake-assembly for lower LCG. Spring-loaded brake-plates slides on polished steel shafts. Ready-to-run brake plate/pads assembly with new friction brake material. The ball-raced hard anodized brake-cam push the 2 larger pins which are seated in the aluminium bracket, against the brakeplat, to create very smooth and even pressure to the plate.
The brake system ensures strong and efficient stopping power. The brake pads consist of two steel plates with the friction material pre-baked to the plates, and the brake disk is made from twin ventilated discs with an air-cooling alu centre.
The new braking system sits lower in the car to help LCG. The system is easily accessable for maintenance, due to its very open design.
The spring-loaded bar-pads slide on polished steel pins and are activated through the ball-raced brake cam, a large pin moves horizontally to activate the brakes. Due to the horizontal action of the pin, and not the twisting of the brake cam, all distortion in this area is removed and the brake pads are evenly pressed together. The brake cam is supported by ball-bearings for smooth, precise action.
This further adds to the precision and exceptional stopping power of the braking system.
The backbone of the car is the chassis plate, which has been CNC-machined from extremely stiff american 7075 T6 - 5mm aerospace-quality aluminium and sports a wide front opening to adjust the front anti-roll bar. A cooling slot under the engine helps aid temperature control while chamfered edges prevent the chassis from catching on kerbs giving it better overall ground clearance on the track. It houses the battery pack, which is mounted into the newly-designed carbon fibre battery mounting plate and is held in place by four screws, screwed directly into the chassis plate itself. This 966-TE plate has also been machined to accept the optional front stiffener plate.
The Serpent 966-TE comes in a very small carton box, with full color box-top.
To allow you to build your car with the greatest of ease, Serpent supplies a full colour instruction manual, this includes all the exploded views and options to locate part-numbers easily.
The Manual is available to download as a PDF in the 'Downloads' section of this product page.
Enjoy the build and the drive !
The front body mount of the Serpent 966 is screwed down along with the bumper, which allows for some flex in the body post mounts whilst maintaining the stiffness of the overall assembly. The body mount is held further through two screws mounted from the side.
As with the rear roll centre, the front roll centre can also be easily adjusted. The adjustment is done by removing the front upper suspension brackets and inserting spacers below the brackets and then re-attaching them to the car.
The 966 comes with anodised aluminium front upper suspension brackets that are machined from a single piece of aluminium. These attractive pieces are extremely strong and offer great protection in the event of a heavy impact. The other great advantage of this part is that due to the use of inserts, with an offset hole, you can now adjust the pivot position of the upper front wishbones.
Another nice design feature is that the same front suspension bracket can be used on both the left and right sides of the car.
Thew new aero bumper can be used closed, or partially open, by cutting out the aligned inner parts.
These Wide offset (WOS) steering blocks can be used in 2 different configurations by swapping the side of the car they are mounted on. These changes, depending on the side the steering blocks are used on, will either give you more turn in on corner entry, or more on power steering at corner exit.
The included eccenters ensure that the axle is raised higher than centre line, which enhances the effect caused by this new configuration and due to the use of eccenters the bearings are now also smaller and lighter, reducing un sprung weight.
The front anti-roll bar levers, that are combined with the down stops allowing for easier tweak. They placed inwards, inside the bearing-blocks, which makes them more effective due to less flex. The front lower arms accommodate the front anti-roll bar position.
The carbon fibre battery mounting plate has been designed to be able to accommodate many different battery pack configurations, including the traditional 5 cell pack. The battery mounting plate is made of a 2mm black carbon fibre and is mounted to the chassis plate by four countersunk screws.
The radio plate support bracket, placed directly in front of the engine, also acts as the mounting point for the roll over bar.
The Serpent 966 comes supplied with an aluminium middle bracket as standard. Replacing the standard composite version, the new part is much stiffer and so reduces flex in this axle which prolongs the life of the belts and pulleys.
These adjusting nuts are made from Nylon and replace the previous aluminium nut with plastic insert which will not only makes assembly easier, it also reduces un-sprung weight. Reducing the parts used at this point also reduces side play so it makes for a more precise handling car and because the material used is self-lubricating the movement of the pivot ball will remain smooth throughout use.
Made from Spring Steel, these polished 8.5mm pivot balls are virtually unbreakable and ensure the smoothest suspension movement possible.
Serpent use only the highest-quality drive train in their cars. The 966 car comes supplied with the finest Spring Steel drive shafts capable of withstanding constant punishment; these shafts are ultra durable and very stiff allowing you to put all your power to the tarmac.
Front CVD and rear regular dogbones.
Made from Spring Steel, the front and rear wheel axles are very durable and ultra strong. They are a precision fit for the main bearings when mounted with the supplied shims to ensure a tight precise wheel fit. The front axle also makes up part of the CVD shafts that are included in this kit and can therefore be used with both the supplied quick release system or the optional wheel nuts.
The front shock tower of the Serpent 966 is made from 3mm carbon fibre, which makes this part ultra crash resistant. The front shock tower also features two shock mounting positions to enable you to fine tune your car for any track conditions.
A great feature is the ability to adjust the tension of the front belt. The simple-to-use bearing eccentric holders allow for quick and easy setting.
The 966-TE features a split type radioplate. The larger central parts connects with a rod to the front stiffner. The central part front screws which connect to the bulkheads can be loosened to create more flex; the rod will control the flex.
testing showed that flex in the front has more effect than in the rear or central part of the chassis.
The 966-TE included the latest developed Serpent gearbox with 8mm shaft and new flange, bell and gears. A perfectly balanced gearbox with very low inertia, and a perfect bearing seating.
Durable and ultra quick shifting.
The brake-disk and pulley-adaptor with 3 pins has been modified, and a new alu hardcoated side pully in included to fit the 8mm shaft.
Product Type:Gas Cars > 1/8:
Class:1/8th scale gas on-road, IFMAR rules
Weight:2.520kg (depending on radio gear)
Track-width rear:260mm - 266mm
Track-width front:250mm - 260mm
Wheel base:Adjustable 296 - 300mm +/-1.7mm
Chassis:Adjustable +/- 3mm (rear)
Radio plate:5mm 7075 aerospace quality aluminium, precision CNC machined
Suspension:2.5mm carbon fibre,
Shock absorbers:Independent double wishbone suspension
Fuel tank:RCM shock absorbers
Rear axle:125cc design
Front axle:Solid rear axle
Gearbox:Aluminium front axle with one-way bearings
Clutch system:Lightweight 2-speed SL8
Instructions:Centax true Motion clutch system, hard anodized alu. gears 16-19T std
:Full colour Instruction manual
Adjustability:Camber, Caster, Down-stops, Up-stops, Toe-in, Track width, Wheel base, Front & rear roll centre
:Engine, pipe, body, radio equipment, wheels, tires, battery pack are not included.
|02-18-13||966-TE - Lopez - Almuss||1 MB||Download|
|09-28-12||966-TE - Gruber - DM 2012||973 KB||Download|
|08-20-12||966-TE- Lopez - EC Vila real PT||556 KB||Download|
|07-05-12||966-TE - Lopez - Puerto de SM||558 KB||Download|
|07-03-12||966-TE - Morganti - WN 2012 Frt Meyers||1 MB||Download|
|07-03-12||966-TE - Morganti - TZ 2011||1 MB||Download|
|07-03-12||966-TE - Morganti - Byrons 2012 USA||1 MB||Download|
|06-14-12||966-TE - Sabrina - ENC||1 MB||Download|
|06-12-12||966-TE - Giesa - Hockenheim||557 KB||Download|
|06-11-12||966-TE - Riccobono - Thionville||1 MB||Download|
|05-18-12||966-TE - KH-Meister - Oberhausen||972 KB||Download|
|05-18-12||966-TE - Eberle - GP Aigen AT||2 MB||Download|
|05-15-12||966-TE - Abisset - Grenoble||1 MB||Download|
|05-08-12||966-TE - Ciere - Genk (B)||607 KB||Download|
|05-08-12||966-TE - Salven - Oberhausen||971 KB||Download|
|05-02-12||966-TE - Fransson - Sweden||807 KB||Download|
|04-25-12||966-TE - Kimbrow - Houston||1 MB||Download|
|04-25-12||966-TE - Green - Halifax-wet||978 KB||Download|
|04-19-12||966-TE - Riccobono- Ampuis||1 MB||Download|
|04-11-12||966-TE - Green - Wombwell||978 KB||Download|
|03-26-12||966-TE - Lopez - ARCA||536 KB||Download|
|03-13-12||966-TE - Gerald - Neuville||537 KB||Download|
|11-09-11||966-TE edit setup||1 MB||Download|
|09-15-11||966-TE blank set-up||1 MB||Download|
|09-15-11||966-TE default setup||1 MB||Download|
|09-07-11||966-TE Kimbrow - GLC||688 KB||Download|
|07-27-11||966-TE - Yuya - Boss||4 MB||Download|
Germany: Toni Gruber 2012 Champion with 966-TE (09/16/2012)
Toni Gruber won the 2012 National Championship Title with Serpent 966-TE, in Dormagen Germany.
He also took the 2012 Junior title.
Congratulations with this great result.
07/29/2012 EFRA 2012 EC 1/8 GP onroad
07/06/2012 Serpent 966-TE in full detail
03/26/2012 Spain: Nacho Lopez wins 1/8 Nast with 966-TE
12/06/2011 France: Colinet with Team Serpent 966-TE
07/03/2011 UK: Kyle TQ's and wins round 4 BRCA 1/8
06/28/2011 Salven wins 1/8 scale class with Serpent 966
06/03/2011 USA: Jeremy Cupps wins Texas Biggy with 966
05/18/2011 Salven explains on 966 WC parts 2011
05/10/2011 WC 1/8 onroad USA 2011: Paolo reports
04/25/2011 UK, Kyle Branson wins 1/8 scale nats
04/18/2011 WC 1/8 2011 Sabrina WC 1/8 interview
04/11/2011 WC 1/8 onroad USA: qualifying starts today
04/10/2011 WC 1/8, USA: Free Practise is over
03/30/2011 WC 1/8: Mark Green intro interview
01/14/2011 New: Serpent 966-EVO 1/8 scale onroad
10/21/2010 USA: Serpent wins Heart of America Series
10/11/2010 Italy: Serpent 966 racers dominate Alpen-Cup
10/05/2010 Sotiropoulos 1/8 Greek Champion 2010
10/03/2010 Sabrina reports German Champ 1/8 in Rötz
09/01/2010 Germany: EFRA GP 1/8 onroad, Sabrina reports
08/31/2010 USA: Ciccarello wins GLC with Serpent 966
08/04/2010 Warm up German Championship 1/8
08/04/2010 Report of the Valladolid Race by Nacho López
07/03/2010 EC Italy 1/8 gp. qualifying done
06/29/2010 Italy: EC 1/8 Team Serpent for open practise
06/27/2010 Kimbrow reports the US onroad nats
06/20/2010 John Ermen Wins NK at Utrecht track
06/15/2010 French Nationals 1/8 gas, Redding
06/06/2010 Monaco; Sabrina reports on the EC-B 1/8
05/29/2010 EC-B 1/8: Lorenzi TQ with Serpent 966/Max
05/27/2010 EFRA EC-B Monaco
05/25/2010 R.A.M.S RC Race may 22-23 2010
05/25/2010 EFRA EC-B 1/8 onroad, Monaco
05/11/2010 2nd Round Dutch Championship Rucphen
05/01/2010 UK, Mendip; 5 x Serpent 966 in the final
04/28/2010 Texas Biggy: Cupps (966) TQ-s and wins 2010
04/26/2010 Italy, Fiorano; Serpent 1/8 races
04/20/2010 Spain: Lopez with 966 wins Nationals warm-up
04/20/2010 Germany; Bamberg race, Sabrina reports
04/18/2010 Italy: EFRA GP 1/8: Sabrina reports
04/12/2010 USA: Morganti TQ's and wins FSS with 966
04/05/2010 Germany West: Serpent podium in 1/8 gas
03/30/2010 EC 1/8 warm-up onroad, video semi's
03/30/2010 Holland, Ermen reports from 1/8 Nats
03/28/2010 Tobias Hepp; confirmed for 2010 with Serpent
03/18/2010 EC 1/8 onroad warm-up, Italy
03/14/2010 Lopez with 966 fast in Spain Nats 1/8
03/01/2010 1/8 IFMAR Onroad Worlds track, USA
02/15/2010 Winternats 2010 by DJ Apolaro
02/10/2010 Nacho López report Cerdanyola Modelcar Track
01/27/2010 Agustin Cutini joins Team Serpent Argentina
12/21/2009 Ilia van Gastel returns to Team Serpent
12/16/2009 DJ wins State Series with 966
12/13/2009 Huang Yi-Hou wins Taiwan national with 966
12/09/2009 Kissimmee race Report by Sean Lue
11/25/2009 Brasil, Flavio takes title with 966
11/09/2009 3-hour race win for Serpent 966 plus team
11/03/2009 Sabrina reports, Race / Fair Friedrichshafen
10/26/2009 Riccobono report of Monaco / 966
10/26/2009 Andrea's report of Monaco
10/25/2009 Serpent Taiwan Cup, young Huang-Yi-Ho wins
10/25/2009 Dani Vega runs Serpent 966 for test
10/20/2009 NRW Cup, Hepp wins series with Serpent 966
10/07/2009 October-Fest Races, reports Sabrina
10/01/2009 Italy 966 demo, Calce, track Cassino, video
09/28/2009 Serpent dominates Polish Nationals
09/27/2009 ITA: Calce wins NR Trofeo with Serpent 966
09/08/2009 Slovanic Cup, Belarus; Results 1/8 scale
09/06/2009 USA: Qualifying a the Nats GP 1/10 and 1/8
08/25/2009 WC 1/8: Sabrina reports
08/16/2009 WC: good practise for Team Serpent
08/13/2009 WC 1/8: Practise started
08/10/2009 Slavonic Cup: all info now online 1/8 scale
08/10/2009 UK: Serpent wins 1/10 and 1/8 nitro
08/09/2009 Polen: rc racing GP Pacanow
07/13/2009 Argentina: racereport
07/13/2009 Germany: 1/8 Nats Sabrina reports
07/10/2009 Brasil; Denilson with 966 wins 1st Cpoa Vale
06/29/2009 Swiss: 1/8 warm-up race: Sabrina reports
06/28/2009 Swiss: 1/8 WC warm-up results
06/17/2009 Sabrina Lechner reports from Europe
06/14/2009 DJ Apolaro reports Bumod Grand prix 2009
06/03/2009 Turkye: Bumod Grand Prix
05/30/2009 Italy, EC 1/8 B: Qualfying finished
05/29/2009 Italy: EC-B 1st heat
05/28/2009 Jordy Blok wins Concours d'elegance
05/25/2009 Team Serpent: Jilles Groskamp
05/24/2009 Valentio Rossi with Serpent 966 video
05/24/2009 Italy, EC-B 1/8 Cassino
05/19/2009 Florida Series Season Finale
05/10/2009 Italy: Valentino Rossi races Serpent 966
05/04/2009 France: Elite class 1/8 (report Riccobono )
04/20/2009 SERPENT NITRO TOUR 2009 - FIORANO
04/19/2009 New Zealand: 966 track test and race
04/07/2009 Italy: 1/8 Nats Cassino
03/30/2009 966 takes victory at the Texas Biggie
03/25/2009 Grand Prix EFRA 1/8 Aulnay
03/23/2009 S-blog: Sabrina Lechner, GP France
03/21/2009 France: EFRA GP 1/8 Aulnay
03/19/2009 Serpent 966 and upgrade, supply update
03/15/2009 Serpent 966 set-up sheets now online
03/15/2009 Paolo Morganti report Florida Winternats
01/31/2009 Serpent 966 scoop-3
12/22/2008 Serpent 960 - DJ wins Toys for tots race
12/09/2008 Brasil: Flavio 2008 champion with 960
11/12/2008 Andrea Cristiani wins Motonica trophy
11/03/2008 Dutch Serpent rc car driver tests in F3 car
10/29/2008 Nam is Korean Champion 2008 with Serpent
10/26/2008 Germany, Merlin wins with 960
10/08/2008 Robin d\'Hondt 1/8 Belgian Champion 2008
09/16/2008 Rischard Dirk is Lux. Champion
09/16/2008 The Apolaro Report - Florida State Series
09/15/2008 Charalambous take win for Serpent in Cyprus
09/15/2008 Ermen checks in - Dutch Nationals Round 5
09/11/2008 The Apolaro Report - 1:8 US Nationals
08/26/2008 Wood takes second 1:8 BRCA win
08/19/2008 Victory in Luxembourg for Hepp
08/12/2008 ORCA Championship title for Byrne
08/12/2008 Hepp wins German regional race
07/28/2008 Lackner takes European 1:8 Junior title
07/25/2008 Fantini puts 960 on EC pole position
07/24/2008 Serpent victory at Texas Biggie
07/14/2008 Kurzbuch wins Round 3 of Swiss Nationals
07/13/2008 Connolly is 2008 Irish Champion
07/11/2008 Wombwell victory for Wood
07/08/2008 John Ermen checks in - Victory in Luxembourg
07/07/2008 Connolly repeats double
06/23/2008 Double Podium for Serpent in Swedish Cup
06/16/2008 Serpent 1-2-3 at ORCA Race
06/16/2008 Paolo Morganti reports on Capitol Classic
06/08/2008 Champion Cabezas takes first win
06/04/2008 Dirk wins Luxembourg National
06/03/2008 Connolly first to do the double in Ireland
05/28/2008 Cristiani wins Italian 1:8 Open Championship
05/20/2008 Hicklin maintains Serpent winning run
05/18/2008 Return victory for Lacey
05/13/2008 Salven eases to Oberhausen victory
05/04/2008 Tomaschko wins 1:8 EC-B Warm Up Race
04/27/2008 TQ & Podium for Lackner in Swiss Nationals
04/27/2008 Serpent 960 1-2-3 at Halifax
04/24/2008 Serpent 960-08 kit production ready
04/07/2008 Cabezas takes first podium in Round 2
03/31/2008 Nam takes double win at KORG
03/26/2008 Diver wins BRCA 1:8 Season opener
01/29/2008 Tobias Hepp joins SDD program
01/23/2008 Another successful Hong Kong Nitro Tour
01/06/2008 Hong Kong kicks off 2008 Serpent Nitro Tour
12/16/2007 Serpent introduce the 960-08
11/28/2007 Sang Jun & Hyun Ho win 2007 Korea Cup
11/13/2007 Nations Cup glory for Spain and Netherlands
10/30/2007 Sotiropoulos is Greek 1:8 Champion Again!
10/16/2007 Serpent Racing School AMCA Apeldoorn
10/15/2007 Spain confirms Serpent Nations Cup teams
10/14/2007 WC - Andrea Cristiani is Vice World Champion
10/09/2007 WC - Serpent top qualifying after 2 rounds
10/01/2007 Austria announce strong Nations Cup squad
10/01/2007 Green & Serpent are British 1:8 Champions
09/25/2007 Luxembourg title for Rischard & Serpent 960
09/10/2007 Connolly heads Serpent 1-2 in Irish National
09/03/2007 Bergfelt is Swedish Champion
08/20/2007 Dalton Touring Master
07/27/2007 Salven TQ\'s European Championships
07/26/2007 Serpent host EC BBQ, Geisendorf Fastest
07/15/2007 2007 Nations Cup date announced
07/10/2007 D\'Hondt wins at Bierset
07/10/2007 Serpent do the double at Trofeo Novarossi
07/01/2007 D\'Hondt claims Benelux Championship title
06/26/2007 Cupps wins at Region Nine ROAR Championships
06/25/2007 Wood wins to keep Serpent domination intact
04/17/2007 D\'hondt on top in Belgium
04/17/2007 Colinet triumphs at Besançon
06/12/2006 Masao Tanaka 2006 Asia-FEMCA championships
06/10/2006 GP 1/8 Sweden
06/10/2006 GP 1/8 Sweden. Salven interview
06/01/2006 Fransson wins 1/8 National with S960
05/28/2006 Andrea Serpent 960/Max wins EC-B 2006
05/17/2006 Racing in Argentina
05/03/2006 Races 30 april 2006
03/28/2006 FRANCE GP 1/8
03/25/2006 Salven TQ at French GP 2006
02/15/2006 Central Park Endurance race 150 minutes