My location: United States
Serpent S411 190mm Sport (SER400006)
Zoom image

Serpent S411 190mm Sport (SER400006)

In stock (33 items available)
Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear geardiff, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.
  • US$177.19
Market price: US$196.88, you save US$19.69
  • 10% less
Qty:  
Add a different product to compare
  • Weight
    4.5 lbs
  • SKU
    SER400006

Serpent 411 Sport; features

Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounteded on a seperate plate, so flex is less influenced.

Shocktower front
Black glass fibre shocktower with 3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

C-hub / steeringblock
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.

Shocktower rear
Black glass fibre shocktower with 4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR

Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Motormount
Machined aluminium motormount / middle shaft support.

Middle shaft
Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Bodymount
Front bodymount is mounted trhrough the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.

Gear-diff
Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.

Spool
Front nylon lightweight spool with screw mounted front gearpully

Transmission / belts / pullies
Smooth low friction fine pitch belts combined with optimised nylon pullys


Driveshaft / wheelhex / wheelaxle
Steel driveshafts, combined with ballraced wheelaxles and nylon wheel-hex adaptors

Steering system
Steering system with optimised ackermann for neutral steering-feeling.

Shockabsorbers
Latest type RCM competition shockabsorbers with membrames and checked colorcoded race springs.

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare parts and optionals. Decal-sheet with Serpent and 411 logo’s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optionals / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optionals, alsof fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optionals section of the 411 Sport as well.

Lets go racing !
Team Serpent

  • Brand:
    Serpent
  • Product Type:
    Electric Cars > 1/10 190mm:
  • Class:
    1/10th scale 190mm Electric
  • Purpose:
    190mm touring car
  • Chassis:
    2.5mm glass fibre, CNC machined
  • Suspension:
    Front C-Hub suspension system
  • Rear axle:
    Rear gear- differential
  • Front axle:
    Front nylon spool
  • Drive system:
    4wd through 2 kevlar reinforced timing belts
  • Shock absorbers:
    RCM shock absorbers
  • Wheel base:
    254mm +/- 4mm
  • Track-width front:
    190mm /- 6mm
  • Track-width rear:
    190mm /- 6mm
  • Adjustability:
    Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
  • Instructions:
    Full colour instruction manual, reference guide
  • Not included:
    Motor, battery, speed Controller, tires, body, radio equipment.
09-19-12Manual 411 Sport2 MBDownload
01-17-13411-S - Callesen - DHI Cup1 MBDownload
06-06-12411 - set-up - default925 KBDownload
06-06-12411 - set-up - edit1 MBDownload
06-06-12411 - set-up - blank916 KBDownload
 Weight set brass 5gr - 12gr - 20gr (2+1+1) (SER401433)
 Belt Kevlar 30S3M510 (SER401350)
 Belt Kevlar 30S3M186 (SER401352)
 Belt 30S3M510 low friction (SER401351)
 Belt 30S3M186 low friction (SER401353)
 Chassis carbon 2.5mm (SER401354)
 Bumper upper/ lower (SER401361)
 Bearingblock alu (SER401365)
 Middle shaft alu (SER401366)
 Motormount bracket alu (SER401367)
 Motormount alu (SER401368)
 Servomount plate (SER401369)
 Servomount L + R alu (SER401370)
 CVD axle set steel (2) (SER401373)
 Topdeck carbon 2mm (SER401374)
 Suspension bracket alu 0 (SER401375)
 Suspension bracket alu 1 (SER401376)
 Suspension bracket alu 2 (SER401377)
 Suspension bracket alu 3 (SER401378)
 Antirollbar 1.4mm (SER401379)
 Solid axle/spool (SER401380)
 CVD insert (2) (SER401381)
 Shocktower mount alu L+R (SER401382) - DISCONTINUED
 Shocktower carbon front (SER401384)
 Shocktower carbon rear (SER401385)
 Wheelhexagon 1mm offset (2) (SER401387)
 Bushing alu 3x5x1 (10) (SER401388)
 Bushing alu 3x5x2 (10) (SER401389)
 Bushing alu 3x5x4 (2) (SER401390)
 Antirollbar ball (2) (SER401391)
 Bearing excenter (4) (SER401392)
 CVD driveshaft (2) (SER401394)
 Steeringrack alu 1 (SER401395)
 Upright (2) (SER401396) - DISCONTINUED
 Bracket middleshaft alu (SER401398)
 Bearingmount middleshaft alu (SER401399)
 Steering lever alu (2) (SER401401)
 Antirollbar mount alu (SER401402)
 Pivot pin rear-inner (2) (SER401403)
 CVD wheelaxle (2) (SER401406)
 Pivot pin rear-outer (2) (SER401407)
 Driveshaft solidaxle (2) (SER401408) - DISCONTINUED
 Bushing steeringblock (4) (SER401410)
 Antirollbar bushing (16) (SER401411)
 Geardiff outdrive (2) (SER401414)
 Antirollbar 1.2mm (SER401415) - DISCONTINUED
 Antirollbar 1.6mm (SER401416)
 Antirollbar 1.8mm (SER401417)
 Suspension bracket alu 1.5 (SER401418)
 Suspension bracket alu 2.5 (SER401419)
 Suspension bracket alu 3.5 (SER401420)
 Upright alu (2) (SER401421)
 C-hub 2 alu L+R (SER401423)
 C-hub 4 alu L+R (SER401424)
 C-hub 6 alu L+R (SER401425)
 Spacer suspension 0.5mm (2) (SER401426)
 Pully 19T alu (SER401427)
 Driveshaft adaptor delrin (2) (SER401428) - DISCONTINUED
 Trackrod alu M3x38mm (2) (SER401429)
 Camberlink alu M3x26mm (2) (SER401430)
 Topdeck carbon 2.5mm (SER401431) - DISCONTINUED
 Chassis carbon 2mm (SER401432)
 Bushing smaller bearing (4) (SER401434)
 Decalsheet S411 (2) (SER401435)
 Ball differential-set (SER401436)
 Ball diff shaft female (SER401437)
 Ball diff shaft male (SER401438)
 Ball diff nut (2) (SER401439)
 Ball diff pully 38T (SER401440)
 Ball diff spring (4) (SER401441)
 Ball diff screw - nut (2) (SER401442)
 Chassis carbon 2.25mm (SER401444)
 Motormount bracket alu mono (SER401451)
 Double joint cardan DJC set (2) (SER401445) - DISCONTINUED
 Driveshaft DJC (2) (SER401446)
 Wheelaxle DJC (2) (SER401447)
 Coupler DJC (2) (SER401448)
 Insert DJC (4) (SER401449)
 Pin revision set DJC (2+2) (SER401450)
 Wishbone Fr Lw hard (2) (SER401452)
 Wishbone Rr Lw hard (2) (SER401453)
 Upright hard (2) (SER401454)
 C-hub 4 L+R hard (SER401455)
 Decalsheet S411 chrome (2) (SER401456)
 C-hub 4 L+R medium (SER401462)
 Upright medium (2) (SER401461)
 Wishbone Rr Lw medium (2) (SER401460)
 Wishbone Fr Lw medium (2) (SER401459)
 Slipper Spool pad S411 (2) (SER401457)
 Lipo-battery-holder carbon 411 (2) (SER401464)
 Pivot pin front inner TiN (2) (SER401467)
 Pivot pin rear-inner TiN (2) (SER401468)
 CVD driveshaft alu 7075 (2) (SER401470)
 CVD driveshaft-set steel/ alu 7075 (2) (SER401469)
 Steering shaft alu coated (2) (SER401466)
 Wishbone rear lower (2) (SER401393)
 Steeringrack V2 (SER401465)
 Shim 4x10x0.3 (10) (SER401478)
 Suspension bracket alu 0.5 (SER401490)
 Antirollbar 1.2mm rear (SER401496)
 Antirollbar 1.4mm rear (SER401497)
 Antirollbar 1.6mm rear (SER401498)
 Antirollbar 1.8mm rear (SER401499)
 Topdeck carbon 2mm flex (SER401495)
 Pivotball uni 4.5mm alu (4) (SER401500)
 Shrink tube for DJC (10) (SER401486)
 Bushing alu 3x5x4 orange (2) (SER401484)
 Topdeck carbon 1.75mm (SER401563)
 Shocktower mount L+R 411-S (SER401562)
 Cvd wheelaxle 411-S (2) (SER401543) - DISCONTINUED
 Geardiff 411 set v2 (SER401532)
 Geardiff revision set V2 (SER401526)
 Trackrod M3x38mm 411-S (2) (SER401536) - DISCONTINUED
 Trackrod M3x26 411-S (2) (SER401537) - DISCONTINUED
 Wheelaxle 411-S (SER401544)
 Servomount 411-S (SER401548)
 Topplate 411-S (SER401549)
 Bushing Steeringrack V1 (2) (SER401565)
 Antiroll bar mount fr/rr (2) (SER401557)
 Wheel hex 411-S (2) (SER401553)
 Shocktower rr 411-S (SER401551)
 Shocktower fr 411-S (SER401550)
 Servo holder l+r 411-S (SER401555)
 Steering lever 411-S (2) (SER401556)
 Suspension bracket rr-fr 0 (SER401558)
 Suspension bracket 2 411-S (SER401560)
 Suspension bracket 3 411-S (SER401561)

DHI Cup with Serpent 411 Sport kit (01/16/2013)

The idea
As I signed up for the DHI Cup in the modified class, I thought why not race in the Superstock class too? Normally there is plenty of time between each round, so I would not get any stress to race a second class. My second car I had used for spares, so I needed a car, and then the idea came to me: why not try the Serpent S411-S - the cheaper version of my TE race car? I made a deal with Serpent. I got a Sport and I should race the Sport version as stock as possible. Here are my experiences with the Serpent S411 Sport version.


more >>>


All the News

Drop items here to shop
Product has been added to your cart
    • US$9.99
    Add a different product to compare
    • 10% less
    • US$3.35
    Add a different product to compare
    • 10% less
    • US$10.05
    Add a different product to compare
    • 10% less
    • US$5.72
    Add a different product to compare
    • 10% less
    • US$12.53
    Only 5 left in stock
    Add a different product to compare
    • 10% less
    • US$6.28
    Add a different product to compare
    • 10% less
    • US$10.43
    Add a different product to compare
    • 10% less
    • US$4.27
    Add a different product to compare
    • 10% less
    • US$5.94
    Add a different product to compare
    • 10% less
    • US$7.63
    Add a different product to compare
    • 10% less