Serpent enters the competitive electric touring car market with the S411, which like all our previous cars, has been designed to win straight out of the box. Featuring an ultra low centre of gravity, optimized weight distribution, high performance geometry and top quality materials throughout, the S411 should see you in the winner’s circle in no time. In fact everything associated with this car is of the highest quality, from the packaging and supplied manuals, right through to the product and race support.
The S411 features a 2-belt configuration with a long front and a short rear Kevlar reinforced belt that combied with precision moulded gears makes for a super smooth and free drive train.
The S411 is supplied with high-quality lightweight bearings throughout, making the drive train very efficient and allowing it to run very smoothly.
The front bumper has been made from a high impact absorbing foam material and is shaped to protect the entire front end of the car in the event of a crash. The bumper is held in place with a large top-plate. The lower plate can be cut to the desired size and shape.
The Serpent S411 utilises a centrally mounted ballraced dual pivot steering assembly-rack in aluminium. The steering assembly allows for very precise steering and great control.
For adjusting the cars toe-in and track-width, the S411 is equipped with separately mounted suspension brackets on both the front and rear of the car. Each bracket features an easily recognisable number that corresponds to the setting being used and due to the way they are mounted allows the user to easily and accurately adjust their cars settings. The brackets are designed such way that they can be used in any position in the car.
This car is supplied with a complete set of 4 high quality hard coated spring-steel CVD shafts, which are a highly consistent, efficient and durable way to transfer all the power the surface.
The very narrow chassis plate has been machined from a plate of 2.5mm thick carbon fibre, which creates a perfect platform for the cars electronics as well as stiff structure, especially when combined with the equally rigid 2.5mm thick carbon fibre top deck. All holes in the base of the chassis have been countersunk while on the top of the plate, the area around the motor has been milled down to allow it to sit as low as possible. The chassis further features extra holes to mount weights and narrow slits to guide the battery-tape.
The battery pack is kept in place by 2 mounts on the centreline of the car, and 2 special nylon mounts with slits to mount the glass-tape. The mounts can be reverted to move the battery more forward or backwards.
The Serpent S411 features 2.5mm thick carbon fibre shock towers on the front and rear of the car. Each tower sports many holes for adjustment of the shock absorber angle while the rear tower also acts as the mount for the rear body posts and the front tower accommodates a 3rd front body post.
The car comes supplied with a front spool which has been made from hard anodised aluminium while its shape has been optimised to ensure that the part is as light as possible without compromising strength. The drive is provided through the attached pulley into the lightened steel drive cups, which are held in place using steel pins.
The RCCX shock absorbers are very smooth and come pre-assembled. Machined from aluminium and unique in that the shock bodies only open on the bottom half, they are really simple to (re)assemble. The result is an ultra-smooth and air-free shock absorber thanks to the self-bleeding system incorporated into the design. The special X-shaped o-rings create a very smooth seal. The shocks are supplied with 4 different shock pistons. High quality race-springs included with color coding, grinded flat for even load.
The S411 is supplied with coded anti-roll bars front and rear with alu centering bracket. The anti-roll bars are available in a number of thicknesses and are connected to the wishbones using short adjustable track rods, connected with a pivot ball to the lower wishbones
A standard system on all high-end touring cars, the S411 features a front C-hub system, which is a lighter alternative to a pivot ball steering system. The car comes standard with a 4-degree caster block but is also supplied with a pair of 2 and 6-degree blocks. The C-hub is large enough to take out the drive-shaft assembly without dis-assembling the c-hubs.
Similar to the rear suspension in configuration, the front suspension sports a lower composite wishbone while the upper camber adjustment is handled using a track rod which is solid, lightweight and can easily handle impacts.
The kit version of the S411 comes supplied with a lightweight and smooth rear gear-differential. This supersmall differential can handle all the power of BL motors. Gear-diff can also be used on the front.
The newly designed ball-diff is optional
The rear end of the S411 features strong 1-piece lower wishbones and composite. As with all the wishbones on the car, the lower wishbones can be used on both the left and right sides, minimizing the number of spare parts needed to bring to the track. The rear upright features a pivot pin mounting point on the bottom and 2 upper camber link mounting holes for fine-tuning camber rise.
The front and rear end of the Serpent S411 are fully indentical and been designed for high performance and ease of maintenance. The rear bearing blocks have been designed in 2 pieces which allows the topside to be simply removed with 4 screws, giving you easy access to the differential for maintenance or adjustment. All the parts have been machined from aluminium and have anodized in gun metal grey.
To allow you to build your car with the greatest of ease, Serpent supplies a full colour instruction manual and integrated reference guide section that contains all the exploded views and latest options.
S411 decal sheets and set-up sheet are included too.
All Manuals are available to download as a PDF in the Download section of this product page.
The motorbracket is seperated fully from the aluminium mid-shaft brackets to isolate motor-vibrations better. The seperate machined brackets hold the light alumnium middle shaft/ 19T pulley. The holders feature seperate alu bearingholders, which give the best possible support to the mid-shaft section.
Ackermann: two positions on the steering blocks
Camber: adjustable front and rear
Toe-in: adjustable front and rear
Front Caster: 4° static ( 0°, 2° or 6° as optional )
Downstops: adjustable front and rear
Front anti-dive: adjustable range 0° to 3°
Rear anti-squat: adjustable range 0° to 3°
Anti-roll bars: 1.4mm front and 1.4mm rear
Concepts: Harald Hergarten / Michael Salven
Design: Michael Salven
The S411 kit comes without tyres/wheel/spurgear and electronics.
The S411 is packed in a very small strong box with nice graphics, which can be re-used as parts or tyre box lateron.
The box contains bags which are numbered in same sequence as steps in the manual.
Product Type:Electric Cars > 1/10 190mm:
Class:1/10th scale 190mm Electric
Purpose:190mm Competition touring car
Chassis:2.5mm carbon fibre, CNC machined
Suspension:Front C-Hub suspension system
Rear axle:Rear gear- differential
Front axle:Front spool
Drive system:4wd through 2 kevlar reinforced timing belts
Shock absorbers:RCCX shock absorbers
Wheel base:254mm +/- 4mm
Track-width front:190mm /- 6mm
Track-width rear:190mm /- 6mm
Adjustability:Camber, Caster, Down-stops, Up-stops, Toe-in, Track width & Roll centres
:Full colour instruction manual, reference guide
Instructions:Motor, battery, speed Controller, tires, body, radio equipment.
|03-05-12||411 - Callesen - Tinglevhallen||772 KB||Download|
|03-02-12||411 - Reilly USA - stock||276 KB||Download|
|02-28-12||411 - Fischer - TITC 2012||1 MB||Download|
|02-16-12||411 - Helmut - Mett||669 KB||Download|
|02-11-12||411 - Fischer - Snowbirds mod||1 MB||Download|
|02-09-12||411 - Crisp - Snowbirds-17.5 boost||773 KB||Download|
|02-09-12||411 - Crisp - Snowbirds-mod||772 KB||Download|
|02-01-12||411 Rasmus Tobias Callesen -Vamdrup Denmark||772 KB||Download|
|01-29-12||411 - Brunelli - ETS stock ITA||1 MB||Download|
|01-25-12||411 - Fischer - ETS Italy mod||1 MB||Download|
|01-16-12||411 - Fischer - DHI 2012||1 MB||Download|
|01-11-12||411 - Callesen - DHI2012||772 KB||Download|
|01-11-12||411 - Gergely - mod||1 MB||Download|
|01-04-12||411 - Nielsen - dhi-pre||772 KB||Download|
|12-28-11||411 - Crisp - carpet high grip||773 KB||Download|
|12-14-11||411 - whitening - 17.5 blink||978 KB||Download|
|12-13-11||411 - Brunelli - Scandiano||1 MB||Download|
|12-05-11||411 - Steven-DK - DK3||773 KB||Download|
|12-05-11||411 - Nielsen - Dk3||770 KB||Download|
|11-25-11||411 - Manu - Carpet||1 MB||Download|
|11-15-11||411 - Fischer -Dortmund 2011||1 MB||Download|
|11-15-11||411 - Fischer -ETS1 2011||1 MB||Download|
|11-06-11||411 - Florian-ETS-D||610 KB||Download|
|11-03-11||411 - Nicolai - DK1-2011||822 KB||Download|
|11-03-11||411 - Steven - DK1-2011||877 KB||Download|
|09-20-11||411 - maju - DMHobby||515 KB||Download|
|09-20-11||411 - flo - DMSport||532 KB||Download|
|09-20-11||411- Fischer- German Nats 11||1 MB||Download|
|09-07-11||411 - Patto - Australia||514 KB||Download|
|08-24-11||411 - Fischer - EC2011||1 MB||Download|
|07-31-11||411 - Fischer - Geilenkirchen||1 MB||Download|
|07-26-11||411 - Cseko - outdoor 3rd||1 MB||Download|
|07-22-11||411 - CK- Halifax||556 KB||Download|
|06-27-11||411 - kimbrow - usa-small||918 KB||Download|
|06-20-11||411 - edit- v2||1 MB||Download|
|06-20-11||411 - default - v2||925 KB||Download|
|06-20-11||411 - blank - v2||916 KB||Download|
|06-14-11||411- basis - outdoor - D||711 KB||Download|
Snowbirds: report by Marc Fischer (02/12/2012)
It was a little bit challenging. It started not well due to the missing grip at the beginning but the S120 LT car felt really good during practice!
I made 2 - 3 small mistakes in the first round of qualifying, I lost 4 sec. but nevertheless I managed to take the 4th place.
The first run was fast enough to secure a place in the A-Main. Something strange happened with the car for the next runs and I could not figure out what.
For the final, I rebuild the full car, but already after 4 laps I got some tire problems (broken tire) and I finished the race on 10th position only.
During the practice I tested a couple of new products:
- Topdeck 1,75mm
- Plastic Spool ( made for the 411 Sport)
- updated C-Hubs (fit very well with the new double driveshaft)
During qualifying my 411 ran fine and I managed to take 5th position in the A-Main. I had good hope for the finals which took place on Sunday.
At the start of the final I could pass Paul Lemieux and thanks to a small mistake of Naoto on his part, I was able to take the 3rd spot after 5 laps. But I was hit by Pauls car and this incident on the track damaged my diff and I finished the race in 4th place. Fellow Serpent 411 Martin Crisp did really well too, being 7th in the A-Main as well.
I would like to thank all my sponsors !!!
02/05/2012 USA: Snowbirds
01/31/2012 DRCMU 3 - Indoor - Denmark
01/11/2012 Fischer reports from DHI-Cup 2012
12/19/2011 Canada / USA: Martin Crisp joins Team 411
12/12/2011 Italy: Report on 411 racing by Brunelli
11/18/2011 UK: Jonny Boden wins BRCA Stock with 411
11/11/2011 ETS-1 Germany, report Marc Fischer
11/10/2011 Denmark: Callesen 2nd place in Nats with 411
08/23/2011 Fischer race-report EC 2011 1/10 TC
06/19/2011 Serpent S411 in pieces by RC MAN
06/09/2011 Serpent 411 kits are shipping
06/07/2011 Serpent 411 assembly in few steps
04/20/2010 Romenia: Faur takes win with S400
03/17/2010 Germany-West Champion: Patrick Pash (S4xx)
03/02/2010 Nielsen wins DK superstock with S400
02/09/2010 Germany: Pasch TQ-s and wins Dortmund (S4XX)
02/02/2010 Toni Gruber reports race in Berlin
01/28/2010 Germany: new Team drivers for Serpent EP10
01/27/2010 aka Cristake takes win with S400 in Ruse
01/25/2010 Mark Green / S120 win 4th carpet Wars, UK
01/25/2010 Gruber wins with Serpent S400
12/02/2009 Nielsen fast with S400 in Danish Cup
11/29/2009 Christian Faur 5th in ETS ProStock with S400
11/25/2009 Bulgaria Racing Electric Indoor
10/06/2009 ETS season Nicolai Nielsen reports S400
11/28/2008 Henriet wins with S400 in Belgium
11/03/2008 Nielsen take spodium in Danemark with S400
10/25/2008 UK: Rug-racers EP10
10/08/2008 Manuel Stratter wins TirolCup with S400
10/01/2008 Finch & S400 win 2008 SLCC Championship
09/17/2008 S400 is Parana’s 2008 EP Stock Champion
09/09/2008 Jakbu Franek is Polish Junior 540 Champion
06/26/2008 Another win for Wubben in Dutch Nationals
06/26/2008 1-2 for S400 in German Region West
06/09/2008 S400 dominates German Summer Championships
06/09/2008 Nielsen in control in Danish Nationals
05/28/2008 Randy Caster reports on the \'08 Reedy Race
05/22/2008 S400 dominates German National qualifiers
05/22/2008 Another podium for Henriet & 720 in Belgium
05/11/2008 Double victory for S400 at Italian Nationals
05/07/2008 Billy Easton Column - Worlds Warm Up
05/07/2008 Finch wins BTCC encounter with S400
04/28/2008 S400 takes 1-2-3 in BRCA Opener
04/23/2008 MMR Electric Challenge \'08
04/22/2008 Klöckner is German Junior EP Champion
04/21/2008 S400 wins Romanian National Championship
04/15/2008 S400 shines in France
04/14/2008 S400 flies at Dutch ETS encounter
03/30/2008 Lawlor wins Irish Interclub Championship
03/30/2008 Prümper stars with stars at LRP Masters
03/27/2008 Gergely claims second Mod title with S400
03/25/2008 Serpent S400 - Updated belts
03/17/2008 Nilsson takes S400 to SSIC title
03/15/2008 Nielsen wins ETS in Denmark
03/11/2008 Nilsson wins R7 of Middel Swedish Cup
03/11/2008 Billy Easton Column - TITC
03/06/2008 Another podium for Nielsen & S400 in Denmark
02/26/2008 S400 rules at Florida State Series
02/25/2008 Colon takes S400 to foam victory
02/25/2008 S400 1-2 in Finland
02/18/2008 S400 continues winning ways in Hungary
02/17/2008 First podium for the S-400 in Denmark
01/30/2008 S400 wins opening round of World Model Cup
01/28/2008 Kalves and S400 win in Finland
01/28/2008 Perfect S400 debut for Wood
12/19/2007 Swedish Lucia Race 2007 Boras
12/11/2007 Unico dominate with S400
11/29/2007 S400 wins first ever Xceed Challenge
11/25/2007 Lawlor takes S400 to Munster GP victory
10/29/2007 Geissendorf makes strong EP debut
10/14/2007 S400 wins on Hungarian debut
10/02/2007 Billy Easton - 2007 IIC Report
09/30/2007 IIC in Las Vegas - Finals Day
09/27/2007 S400 TQ\'s Down Under
09/27/2007 IIC in Las Vegas - Second Practice Day
09/26/2007 IIC in Las Vegas - First Practice Day
09/06/2007 Serpent adds Billy Easton to its team
09/04/2007 Jeff Cuffs joins Team Serpent
09/04/2007 S400 wins on Austrian debut
08/29/2007 Austrian hosts second Nitro Tour