My location: United States
Serpent S100 Link 1/10 pancar EP (SER410050) - DISCONTINUED
Zoom image

Serpent S100 Link 1/10 pancar EP (SER410050) - DISCONTINUED

Out of stock
Serpent 1/10 scale pancar S100 Link. The 1/10 World GT version of the succesfull S120 1/12 scale pan-car. High performance 1/10 scale pan chassis, with nicely machined carbon fibre and aluminium parts. Superb fully adjustable front end creates loads of steering. Spring loaded Link system, in combination with diagonal positioned main shock and lateral damper with through shaft, control the roll of the car. Well balanced chassis offers wide selection of set-up features and options to dial the car in best for any track. No wheel/tyres, electronics or body included. Available start august 2010.
  • US$241.17
Market price: US$267.97, you save US$26.80
  • 10% less
Add a different product to compare
  • Weight
    3 lbs
  • SKU
    SER410050

The S100 Link chassis consists of 3 main elements, the 2.5mm thick carbon fibre chassis plate, the top-deck and the rear aluminium motor pod. The chassis uses a Link-system , and is damped using a conventional centrally mounted shock absorber together with a laterally mounted floating monoshock with through shaft.

The front end of the car is completely adjustable and utilises the now standard fixed lower suspension arms combined with active top wishbones, which together with kingpin mounted springs ensure that the car is able to corner at high speeds and soak up any small bumps found on the racing surface.

Serpent pan-car developers Markus Mobers and Paul Ciccarello, both with over 20 years of pan car racing experience, created this new masterpiece, assisted by Billy Easton and Michael Salven.

The front end of the car features 11 different adjustments to help you get the most from your car, all of which are easy to adjust and measure. Fixed lower suspension arms are themselves damped by the central strut which uses rubber o-rings to take up the flex in this area, while the grey anodised aluminium front upper wishbone mounts are available in different caster angles, the car being supplied with 6 degree versions as standard. With the steering block king pins spring loaded, the cornering forces are channelled through the upper wishbone, which enable the car to corner at high speeds.

Another unique feature of the S100 Link is its laterally mounted floating monoshock which dampens the flex between the chassis and the motor pod.

Mounted using ball joints from the top of the rear motor pod, both ends of the shock shaft are attached to the top of the rear carbon body mount plate on the chassis, and thanks to its design even the smallest of movements between the front and rear of the car is easily absorbed.

This system plays a big part in how the car turns into a corner which can be adjusted through the use of different oils and shock pistons.

The springloaded side-bars, the links, are made of composite nylon and control the roll of the chassis, together with the lateral damper and the main central shock.

Precision made springs and pivot balls.

The central section is a combination of elements to control the movements of the rear end perfectly
- a central main shock, based on the famous Serpent RCC technology; the shocktower enables various angles.
- the laid down mono-shock, with through type shock-rod, and excellent dampening charateristics
- 2 spring loaded shaped side bars
These elements interact to create the best possible handling (roll, bump and alignment) under all grip-conditions.

For securely mounting the body shell to your S100 Link, the car has strong plastic body posts front and rear. All 4 posts are supplied with orange anodised adjustable collars to precisely adjust the body's height and the posts are supplied extra long to allow the user to cut them to their own preferred length. The front body posts have also been designed to help protect the front of the carbon chassis from splitting in the event of a heavy front impact.

On the S100 WGT Link, the Lipo's can be mounted in different positions by simply changing the composite battery insert mounting position, perfect for adjusting the cars weight distribution.

The S100 WGT comes supplied with a high quality miniature servo saver, which through the use of orange anodised shims, has adjustable Ackerman.

The kit includes 3 alu servo posts to select from, which enable perfectly centered mounting of any popular brand servo.

The lightweight graphite rear axle is mounted on bearings that sit within eccentric composite inserts that allows the user to ability to quickly and easily change the rear ride height of the car simply by changing between inserts.

The kit comes supplied with all 9 inserts which range between 0 and 4mm, each differing by 0.5mm and all are reversible for an even wider range of adjustment.

The S100 Link comes supplied with a durable and high performance ball differential. Easily adjusted by a plastic nut, accessible through the right rear wheel, the diff uses high quality steel balls and plates and is supplied with both suitable silicone and graphite grease for use during assembly and maintenance.

The newly designed rear diff features improved hardened D-plates and carbon shaft assembly for super smooth diff action.

To aid rear traction under acceleration and to absorb bumps, the S100 Link sports a centrally mounted shock absorber. Supplied with a soft spring, the pre load of which can be adjusted, the front mount of this shock absorber is used for adjusting the rear down stop and range of movement between the chassis and motor pod.

The central shock is mounted on a carbon-alu shock-tower with a number of positions to choose from.

The strong basis is formed by the 2.5mm thick carbon fibre chassis plate with pockets to allow for a 1S Lipo pack or a 2S lipo-pack, with supports enabling a forward or backward battery position, and enough space for all the valuable electronics.

The newly designed motorpod is a beautifull combination of high quality machined alu brackets and top quality carbon fibre parts, bolted together to create an ultra stiff rear pod. The new motor-bracket allows the brushless motor to be mounted in the optimal position for car balance and offers good heat dissipation as well .

The S100 Link is sold in a very compact black box. To allow you to build your car with the greatest of ease, Serpent supplies a full colour instruction manual and integrated reference guide section that contains all the exploded views and latest options. The S100 link also comes supplied with a pair of decal sheets in black and white.

The manual is available to download as a PDF in the 'Downloads' section of this product page.

  • Brand:
    Serpent
  • Product Type:
    Electric Cars > 1/10 pan:
  • Class::
    1/10th scale World GT
  • Purpose::
    Competition pan car
  • Chassis::
    2.5mm carbon fibre, Lipo-prepared, CNC machined
  • Rear axle::
    Graphite shaft with ball differential
  • Drive system::
    2wd direct drive to rear axle
  • Shock absorbers::
    Central oil filled shock absorber and lateral monoshock
05-26-11RC-Man review 31 MBDownload
05-26-11RC-Man review 21 MBDownload
05-26-11RC-Man review 11 MBDownload
05-05-11RC man review1 MBDownload
05-05-11RC man review1 MBDownload
05-05-11RC man review1 MBDownload
02-24-11German test S1003 MBDownload
09-09-10manual page 20 new80 KBDownload
08-17-10S100 ref-list excel27 KBDownload
08-16-10S100 manual-ref guide3 MBDownload
09-21-11100 - set-up default238 KBDownload
10-08-10S100-edit set-up sheet2 MBDownload
09-23-10100 - Mobers- schermbeck1 MBDownload

Serpent S100 1/10 pancar: HK review RC-MAN (05/25/2011)

RC Magazine RC-Man reviewed the S100 , Serpent 1/10 pan car.

more >>>


05/04/2011 Serpent S100: magazine review , RC MAN

03/21/2011 2011 SERPENT AUSTRALIA TOUR

02/22/2011 Swiss: podium-finish for S100

01/28/2011 USA, Snowbirds, Mobers stays in front rows after 3 rounds

01/26/2011 USA, SNowbirds, free practise results

11/25/2010 USA: Indoor Carpet Nationals Serpent S120L and S100

09/08/2010 S100 set-up sheet editable version online

04/28/2010 Hungary Nats: Faur champion with S120 and vice champion with S400

04/28/2010 German nats 1/12 2010: Mobers TQ's with Serpent S120L

04/18/2010 Germany: Dortmund show races pan-cars

03/28/2010 USA Roar Nats 1/12, finals

03/27/2010 USA EP Nats 1/12 Qualifying after all 6 heats

03/25/2010 USA: EP Nats, Ciccarello fastest in 1/12 practise with S120

03/25/2010 UK: Hicklin / S120 wins UK Nats stock Rd. 6

03/15/2010 EC Report Mobers: vice champion 1/12 2010

03/15/2010 Germany, Serpent does triple with S400 and S120, again

03/08/2010 Serpent S120L, vice champion in Belgium

03/07/2010 EC 1/12: Mobers vice-champion prostock S120L

03/06/2010 EC 1/12 Saturday, Q results

03/03/2010 EFRA 1/12 EC, UK

03/03/2010 S120 Link good showing in the UK

02/09/2010 Makus Mobers report Snowbirds 2010

02/09/2010 Paul Ciccarello report Snowbirds 2010

01/30/2010 Snowbirds Saturday qualifying - sunday finals

01/28/2010 Snowbirds: 1/12 Wednesday practise / thursday heats (2)

11/23/2009 Mobers dominates European Pan Series race 2 (EPS) with S120

11/13/2009 Scoop: Serpent 1/12 scale pancar S120 Link

All the News