The chassis is made from 3mm 7075-T6 aluminium and has been improved regarding the flex characteristics
For the front we can also use a small adjustable weight, especially useful under high-grip circumstances
In the rear we now have 2 options for the pivot-width. The default position is the same as in the 750, while the wider option is similar to the 748
The new rear suspension is completely new. It features the possibility of a toe change during suspension travel.
Due to the unique design, there is zero binding as well under all circumstances
In the neutral position the toe-change is absolute zero. In this position the rear end acts like the regular 750 rear end.
The higher the link on the upright, the more toe-gain is achieved under compression, resulting in more rear traction under acceleration
The new front arms are open style for aerodynamic reasons. They feature mounting points for an optional heave damper
A much longer ramp for the roller avoiding locking of the second gear even with excessive wear on the shoes
2nd gear adapter is locked in position to avoid binding and deliver constant performance of engine and gearbox
New shocks and shock towers. These shocks are taken from the 989 and provide trouble-free, low friction action for increased traction
On top of that we payed a lot of attention to the bottom seal. 2 X-rings and a long bushing provide that extra bit of low-friction sealing that keeps the oil inside and the dirt outside
In this way it is possible to change heave adjustments more or less independent of roll adjustments.
As an example it is possible to have a very light roll damping combined with a very high heave damping, something which is not possible with a classic suspension.
The third damper can be used to only alter the damping characteristics without a third spring, but also to add a spring to alter spring rates for heave
The front and rear heave sets are available as an option.
|09-24-21||750 EVO - Julius Kolff - Baanbrekers NL - 2021||889 KB||Download|
|08-19-21||750 EVO - Bryce Butterfield - Steel City USA - 2021||888 KB||Download|
|08-05-21||750 EVO - Juan Hidalgo - Aigen A - 2021||1 MB||Download|
|06-09-21||750 EVO - Alessio Mazzeo - Naxos world track I - 2021||2 MB||Download|
|11-19-20||750 EVO - Bryce Butterfield - Steel City USA - 2020||1 MB||Download|
|11-04-20||750 EVO - Default setupsheet V1||1 MB||Download|
|11-04-20||750 EVO - Editable setupsheet V1||1 MB||Download|
|11-04-20||750 EVO - Blank setupsheet V1||1 MB||Download|
|09-15-20||750 EVO - Blank setupsheet||1 MB||Download|
|09-10-20||750 EVO - Editable setupsheet||1 MB||Download|
|09-10-20||750 EVO - Blank setupsheet||1 MB||Download|
Juan Hildalgo reports his ENS race in Aigen Austria. (08/05/2021)
Well...! ENS round 1 in the beautiful Aigen track, Austria, is already in the books.
Back home with my dad after four days of Racing.
Sweet and sour taste after a good pace in the qualification, scoring a P1 and a P2 and securing the second position in the grid.
In the final, one of the strangest things that ever happened to me occurred, in the warm up everything was fine, and in the beginning of 45’ final, I missed all engine power in the first laps and drivers who were behind overtook me in the straight and unfortunately some hit me and I finished in the grass (Yes, I was, actually really slow😅)
After some laps power just came back again (yes, magically🤔) and trying to recover I run out of fuel at 4’10”
After all, really happy with the performance of the 750EVO, with which I honestly think we could have fought for the win. Good pace and fastest laps in the 45’ final!
So that’s racing sometimes...now already thinking in the next one,
09/11/2020 Serpent Natrix 750 EVO is coming soon!