> 231-240 of 534
Medium sized body-clips. 10 in a bag. In use for body-posts Serpent 710.
50cm length of smoke coloured fuel tubing.
Complete set of steel brake-plates with a special type of pre-mounted brake-liner. Fits all Serpent cars. After rigorous testing we found this brake liner compound maintains a very high coefficient of friction under all sorts of conditions. It needs limited time to heat up and then stays very stable. You never need to glue brake pads again!. The liners are mounted onto the plates in an industrial oven and then ground to the correct thickness.
High quality machined Titanium track-rods (lightweight and very durable) to use on 1/8 scale racing cars. Complete with 6mm ball-joints. Can be used as replacement for the original track-rods.
High quality machined titanium lightweight and ultrastrong rods of 52mm. Can be used as a replacement for the original push-rods for S950, Vector NT and Veteq.
Steel brake disk with 6 cooling-sleeves for optimal ventilation of the disks. Set of 2 pieces. Use part #9612 as an additional cooling aid between the Brake disks.
Set of 2 aluminium PTFE coated pivot balls.
Hitec insert for use the servo mounted servo saver #1634 & #1635.
A set containing 2 wear resistant material shoes and all the fasteners, springs, grub screws and steel needles required to attach the shoes to the gearbox adaptor. Suitable for use with the LC Gearbox only.
Set of 2 lightweight pulley adaptors for use with the 1/10th scale range of cars. Comes with mounting grubscrews.