> Serpent 733-EVO 1/10 scale 4wd (#804000)
- Brand:
- Serpent
Product Type:- Gas Cars > 1/10 200mm
Serpent 733-EVO Serpent 200mm racecar with 4-wheel drive, 2-speed gearbox, independent suspension. 733-EVO news: - Direct Link System - SFC rear end; Serpent Flex Control rear end, - the rear anti-roll bar ball-bearings are seated in delrin bushings to isloate vibrations - the 2-speed shaft bearings are seated in delrin inserts for optimized fit and to isolate vibrations. - Mono-type engine mount - Mono-type ventilated brake-disk Developed, engineered and tested by Michael Salven, in close cooperation with Team Serpent drivers. Serpent, the racing experience
Related products
View: Text | Images
> Optional parts
| #1434 | Pressure nipple angled Right angled back pressure nipple. Suitable for all Serpent fuel tanks. | View product >>> |
| #160300 | Spring white L23 (2.3/13) (2) Pair of 23mm long white springs (2.3/13). | View product >>> |
| #160301 | Spring yellow L23 (2.8/16) (2) Pair of 23mm long yellow springs (2.8/16). | View product >>> |
| #160302 | Spring orange L23 (3.4/19.5) (2) Pair of 23mm long orange springs (3.4/19.5). | View product >>> |
| #160303 | Spring red L23 (4.1/23.5) (2) Pair of 23mm long red springs (4.1/23.5). | View product >>> |
| #160304 | Spring pink L23 (4.9/28) (2) Pair of 23mm long pink springs (4.9/28). | View product >>> |
| #160305 | Spring blue L23 (5.8/33) (2) Pair of 23mm long blue springs (5.8/33). | View product >>> |
| #160306 | Spring purple L23 (6.8/39) (2) Pair of 23mm long purple springs (6.8/39). | View product >>> |
| #160307 | Spring green L23 (8/45.5) (2) Pair of 23mm long green springs (8/45.5). | View product >>> |
| #160308 | Spring grey L23 (9/51.5) (2) Pair of 23mm long grey springs (9/51.5). | View product >>> |
| #160309 | Spring black L23 (10/57) (2) Pair of 23mm long black springs (10/57). | View product >>> |
| #160310 | Spring set L23 (5) Set of 5 pairs of 23mm long shock absorber springs. The set includes red, purple, orange, pink and blue springs. | View product >>> |
| #1886 | Decal-sheet 1/10 black-white (2) High quality decal-sheet size 30x20cm. Serpent logo's. To apply to bodies. | View product >>> |
| #1888 | Decal-sheet 1/10 chrome (2) High quality decal-sheet size 30x20cm. Chrome. Serpent logo's. To apply to 1/10 scale bodies. | View product >>> |
| #600157 | Collar double (2) Collar double (2) | View product >>> |
| #600484 | Antirollbar spacer 3mm alu (2) Antirollbar spacer 3mm alu (2) | View product >>> |
| #801214 | Wheelaxle Pro (2) Special light-weight wheel axle with double drive slots. Made of high-tensile and heat treated steel. Interchangeable with standard axles 801215. Fits Serpent 710 front and rear, Serpent 705 only front. | View product >>> |
| #802212 | Body posts adjustable front alu (2+1) Set of 3 aluminium body posts for use on front of Serpent 710. Comes with required fasteners. | View product >>> |
| #802255 | Hex wheel adaptors Orange Set of 4 orange anodised aluminium hex wheel adaptors for use on Serpent 200mm chassis'. Includes hex head screw for mounting. | View product >>> |
| #802261 | Track - rod 47mm L + R Titan (2) Titanium trackrods for 720 47mm long with left / right threading. Very light strong and durable. Direct replacement without modifications. | View product >>> |
| #802362 | Body posts adjustable rear alu (2) Set of 2 aluminium body posts for Serpent 710. Comes with fasteners. | View product >>> |
| #802508 | Centax - 3 clutch shoe XP XP clutch shoe for use with the Centax 3. | View product >>> |
| #803168 | Anti-roll bar rear 2.3mm 2.3mm rear anti roll bar for the Serpent 720/733. | View product >>> |
| #803200 | Rod Set 16mm / ball joints (2) Upper rear short track rod set for the Serpent 720, that contains 4 ball joints and 2 short track rods. | View product >>> |
| #803205 | Centax-3 clutch shoe red Red clutch shoe for Centax-III. | View product >>> |
| #804104 | Belt Front 40S3M195 Low Friction Low friction type Kevlar re-inforced drive-belt 4mm wide, 195T. (804104/803246) | View product >>> |
| #804105 | Belt side 40S3M378 Low Friction Low friction type Kevlar re-inforced drive-belt 4mm wide, 378T. | View product >>> |
| #804106 | Belt rear 40S3M186 Low Friction Low friction type 4mm Kevlar re-inforced drive-belt, set 186T. | View product >>> |
| #804107 | Belt set 733 Low Friction (3) Low friction type Kevlar re-inforced drive-belts, set of 3. 5mm wide 186T rear belt, 4mm wide 195T front belt and 378T side belt. | View product >>> |
| #804133 | Suspension bracket rr fr alu V1 Suspension bracket in CNC machined high grade alu. Anodised. Rear side, front one V1, which is the narrow version. | View product >>> |
| #804141 | Anti-rollbar FR 1.8mm Precision made spring-steel front anti-roll bar in 1.8mm | View product >>> |
| #804142 | Anti-rollbar FR 2.2mm Precision made spring-steel front anti-roll bar in 2.2mm | View product >>> |
| #804143 | Anti-rollbar FR 2.5mm Precision made spring-steel front anti-roll bar in 2.5mm | View product >>> |
| #804144 | Anti-rollbar FR 2.8mm Precision made spring-steel front anti-roll bar in 2.8mm | View product >>> |
| #804184 | Front alu shaft with one-way bearings Precision machined front alu shaft with high quality one-way bearings for Serpent 733. Can be easy locked with pins as needed. Supplied with springsteel one-way adaptors, o-rings, pins and steel screws. | View product >>> |
| #804185 | Axle solid front steel /alu Precision machined front spool/solid axle in Serpent spring steel combined with alu pulley-flange. Weigth: 19 grams ( use the original diff pully) Available: end october 2009 | View product >>> |
| #804189 | Engine mount top (Sirio) Top-mounted engine mount, fits latest Sirio .12 crankcases with 32mm fit. | View product >>> |
| #804190 | Bumper foam wide 733 (2) Wide version foam front bumpers. | View product >>> |
| #804192 | Chassis stiffner rear alu Chassis stiffner alu , CNC machined from high grade alu. For Serpent 733, a precision machined aluminium, anodised rear end stiffner. To be mounted between the rear brackets and the legs of the lower engine mont support/chassis stiffner. The long screws replace the ones as standard in the car, mounted from the top. The short csh ones are mounted from the lower side, through the chassis. | View product >>> |
| #804193 | Radioplate support alu CNC machined, anosied alu radioplate supports for Serpent 733. | View product >>> |
| #804194 | Wheel hexagon +1mm (4) Wheel hexagon +1mm (4) to create more offset. | View product >>> |
| #804195 | Wheel hexagon -1mm (4) Wheel hexagon -1mm (4) to create less offset. | View product >>> |
| #804196 | Pulley 18T mid alu Precision machined and hard anodised alu pulley 18T mid. | View product >>> |
| #804197 | Pulley 21T mid side alu Precision machined and hard anodised alu pulley 21T mid side. | View product >>> |
| #804198 | Pulley 20T 2-sp center alu For Serpent 733. Precision machined hard anodized alu brake pulley adaptor with integrated 20T pulley. Light-weight, very low wear and due to anodizing, less dirt and dust will stick to the surface. Direct replacement for standard alu adaptor and nylon 20T gear 804169 and 804112. | View product >>> |
| #804199 | Pulley 21T 2-sp side alu Precision machined and hard anodised alu pulley 21T 2-speed - side. | View product >>> |
| #804203 | Belt rear 50S3M186 Low Friction Low friction type 5mm Kevlar re-inforced drive-belt, set 186T. | View product >>> |
| #804204 | Flange alu for axle front solid / hardware Flange alu for axle front solid / hardware. Available: end october 2009 | View product >>> |
| #804205 | Cvd Wheelaxle pro (2) Cvd Wheelaxle pro (2) Spring steel, lightweight, durable, precision machined and polished. | View product >>> |
| #804206 | Wishbone rear lw L+R Hard Optional composite nylon wishbone rear lower, L+R the same, Hard type. | View product >>> |
| #804207 | Wishbone front lw L+R Hard Optional composite nylon wishbone front lower, L+R, Hard type. | View product >>> |
| #804208 | Wishbone front up L+R Hard Optional composite nylon wishbone front upper, L+R same, Hard type. | View product >>> |
| #804209 | Suspensionset nylon (6) Hard Optional composite nylon wishbone set (6) Front upper, L+R same, Hard type. Front lower, L+R , Hard type. Rear lower , L+R same, Hard type. | View product >>> |
| #804210 | Suspension bracket FR alu L+R (2) Suspension bracket from aluminium L+R (2) Precision machined front suspension brackets for your Serpent 733. Standard nylon inserts fit smoothly. Comes grey anodized. Makes front end stiffer. | View product >>> |
| #804211 | Chassis side stiffner alu Chassis side stiffner alu. Side stiffner for the Serpent 733, in precison machined aluminum. Countersunk holes, very light, great looks. Comes grey anodized. Direct replacement, for the nylon version. Will keep spacing between Centax gears and 2-speed gears more constant. | View product >>> |
| #804213 | Servo saver top + bottom alu (2) Servo saver top + bottom alu (2) Precision machined aluminum servo-saver top and bottom part for Serpent 733. Very smooth servo saver action, less flex, very light and strong, precision fit of Ackermann inserts. Grey anodized finish. Direct replacement of nylon version. | View product >>> |
| #804214 | Steering lever 23T alu Steering lever 23T alu | View product >>> |
| #804215 | Steering lever 24T alu Steering lever 24T alu | View product >>> |
| #804216 | Steering lever 25T alu Steering lever 24T alu | View product >>> |
| #804219 | Bearingblock rear upper 733 V2 Bearingblock rear upper 733 V2. With these bearingblocks you can connect them to the 2-speed bearingblocks to make the rear end stiff. | View product >>> |
| #804223 | Direct Link-Set DLS The Direct Link system is activated during cornering mainly, whereby the outer suspension forces are transfered partially to the inner wheel too, with a pivot-link system. The set includes the carbon fibre camber bracket, 2 carbon fibre brackets for the lower arms, strong springs steel push rods, cnc machined alu pivots with precison fit ball-bearings, aluminum bearing shafts and spacers, a frame op top quality ball-joints ( with some spares ones ) and hardware as needed. A full instruction sheet is provided too. | View product >>> |
| #804225 | Support brackets carbon DLS (2) Support brackets carbon DLS (2) | View product >>> |
| #804228 | Connectorset rear 733 (2+2) Connectorset rear 733 (2+2) Set of 2 rubber and 2 alu connectors with screws as needed. Use together with 804222 | View product >>> |
| #804233 | Chassisplate 733 3mm hard anodised CNC machined 3mm aerospace quality 7075 T6 aluminium. Closed design, to create stiff chassis. Chamfered edges, countersunk holes, recess for transponder mounting, cooling holes for the engine. Hard anodised. | View product >>> |
| #804234 | Centax-3 clutchbell alu Centax-3 clutchbell alu | View product >>> |
| #804235 | Gearbox SL6 for 733 Complete new gearbox for Serpent 733. Its standard on the 733-Team Edition and fits earlier models of 733 cars. The all new design gearbox has very low inertia, lighter adaptor, lighter aluminum bell and one-way adaptor with German oneway, new steel shaft, smaller shoes and new beautifully designed gears. Includes rod type side stiffner with balljoints. | View product >>> |
| #804236 | 2-speed adaptor SL6 2-speed adaptor for the SL6 gearbox | View product >>> |
| #804237 | 2-speed shoe SL6 (2) 2-speed shoe for the SL6 gearbox (2) | View product >>> |
| #804238 | 2-speed drive flange SL6 2-speed drive flange for the SL6 gearbox | View product >>> |
| #804239 | 2-speed housing SL6 2-speed housing for the SL6 gearbox | View product >>> |
| #804240 | 2-speed shaft SL6 2-speed shaft for the SL6 gearbox | View product >>> |
| #804249 | Centax-3 set Ultra 1/10 Complete Centax-3 clutch-set for 1/10 scale 733, with alu clutchbell, XP clutch shoe, hard spring and machined flyweights. Lighter and more punch. | View product >>> |
| #804251 | Pivotball 5.8mm double straight alu coated (4) Pivotball 5.8mm double straight alu coated (4) | View product >>> |
| #804252 | Pivotball 5.8mm alu coated (4) Pivotball 5.8mm alu coated (4) with hexagon. | View product >>> |
| #804254 | Anti-roll bar ball 3.0mm alu (2) Anti-roll bar ball 3.0mm alu (2) | View product >>> |
| #903226 | Shock rods short Ti-Ni (2) Pair of short Titanium Nitride coated shock shafts. Suitable for RCC shock absorbers. | View product >>> |
| #903232 | Spring Support alu light (4) Set of 4 lightweight aluminium spring supports for Serpent shock absorbers. | View product >>> |
| #903341 | Antirollbar ball 3mm (2) Antirollbar ball 3mm (2) | View product >>> |
| #903342 | Antirollbar ball 2,5mm (2) Antirollbar ball 2,5mm (2) | View product >>> |
| #903343 | Antirollbar spacer 3mm (2) Antirollbar spacer 3mm (2) | View product >>> |
| #903344 | Antirollbar spacer 2.5mm (2) Antirollbar spacer 2.5mm (2) | View product >>> |
News